--select mmt_ods.fn_dboecd_test_ods(); drop function if exists mmt_ods.fn_dboecd_test_ods; CREATE OR REPLACE FUNCTION mmt_ods.fn_dboecd_test_ods() RETURNS void AS $$ begin /*********************************************************** Function Name:fn_dboecd_test_ods Function Desc: This function populates data into ods block File Format: DBOECD Sheet Format: DBOECD_TEST Creation Date: March 27 2021 Updation Date: Author: compegence team Function Call: select mmt_ods.fn_dboecd_test_ods() ***************************************************************/ SET search_path TO mmt_staging2; insert into mmt_ods.test_instance ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, job_order_no, sample_receipt_date, test_report_no, generation, customer_name, test_engineer, test_report_date, no_of_sample, test_start_date, test_end_date, tractor_sr_no, test_standard_ref, test_location_name, test_operator, project_group, acceptance_criteria, objective_of_test, test_file_format, test_file_sheet_format, date_of_test ) select client_id, function_id, file_syspk, make, model, test_request_no, date '1899-12-30' + sample_receipt_date::int * interval '1' day as sample_receipt_date , test_report_no, generation, customer_name, test_engineer, date '1899-12-30' + test_report_date::int * interval '1' day as test_report_date , no_of_sample, date '1899-12-30' + test_start_date::int* interval '1' day as test_start_date , date '1899-12-30' + test_end_date::int* interval '1' day as test_end_date , tractor_sr_no, test_standard_refer, test_location, operator_name, project_group, objective, acceptance_criteria, file_format, sheet_mnemonic, current_date from mmt_staging2.dboecd_test_h1_block; update mmt_ods.test_instance a set test_condition=b.c2 from mmt_staging2.dboecd_test_test_condition_block b where a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance a set remarks = b.remark from mmt_staging2.dboecd_test_drawbar_performance_fuel_consumption_block b where a.test_file_ref_no=b.file_syspk; insert into mmt_ods.test_instance_engine_info (client_id,function_id,test_file_ref_no,tractor_model,tractor_make,low_idle_declared,low_idle_observed,high_idle_declared,high_idle_observed) select client_id,function_id,file_syspk,make,model,low_idle_declared,low_idle_observed::int,high_idle_declared,high_idle_observed::int from mmt_staging2.DBOECD_test_engine_RPM_RPM_block; update mmt_ods.test_instance_engine_info a set rated_rpm=b.rated_speed::int ,engine_to_pto_ratio_540_pto=b.engine_to_pto_ratio::numeric::int from mmt_staging2.dboecd_test_engine_rpm_engine_to_pto_block b where a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_engine_info a set engine_cylinder_stroke_mm=b.stroke::int,engine_cylinder_bore_mm=b.bore::numeric,engine_cylinder_no=b.number::int,engine_cylinder_capacity_ltr=b.capacity::int from mmt_staging2.dboecd_test_tractor_specifications_cylinders_block b where test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_engine_info a set engine_serial_no=serial_no,engine_type=type,rated_rpm=rated_speed::int from mmt_staging2.dboecd_test_tractor_specifications_engine_details_block b where test_file_ref_no=b.file_syspk; insert into mmt_ods.test_instance_tractor_info ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, wheel_base_mm, tractor_engine_hp, pto_power_hp, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, wheel_base_mm::int, engine_power_hp::int, pto_power_hp::numeric, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_engine_rpm_engine_to_pto_block; update mmt_ods.test_instance_tractor_info a set steering_type=b.steering_type, transmission_type=clutch_type, transmission_disc_diam=diameter_of_disc_mm from mmt_staging2.dboecd_test_transmission_clutch_block b where a.test_file_ref_no=b.file_syspk; insert into mmt_ods.test_instance_drawbar_info ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, drawbar_type, required_pull_in_kg, actual_pull_in_kg, required_power_in_hp, actual_power_in_hp, calculated_hitch_height_mm, actual_hitch_height_mm, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, pull_type, required_pull_in_kg::numeric , actual_pull_in_kg::numeric , required_power_in_hp::numeric, actual_power_in_hp::numeric , calculated_hitch_height_mm::numeric, actual_hitch_height_mm::numeric, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_engine_rpm_required_pull_block; update mmt_ods.test_instance_drawbar_info a set weight_front_kg = front::int , weight_rear_kg = rear::int , weight_total_kg = total::int from mmt_staging2.dboecd_test_engine_rpm_weight_block b where b.weight_kg='Unballast' and a.drawbar_type='UB' and a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_drawbar_info a set weight_front_kg = front::int , weight_rear_kg = rear::int , weight_total_kg = total::int from mmt_staging2.dboecd_test_engine_rpm_weight_block b where b.weight_kg='Ballast' and a.drawbar_type='B' and a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_drawbar_info a set test_condition=b.test_condition, drawbar_type_info=b.type, height_above_ground_max_mm=b.height_above_ground_max_mm::numeric, height_above_ground_min_mm=b.height_above_ground_min_mm::numeric, position_related_to_pto=b.position_related_to_pto, wheel_base=b.wheel_base from mmt_staging2.dboecd_test_transmission_drawbar_block b where a.drawbar_type=b.test_condition and a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_drawbar_info set drawbar_type_name='Un-Ballasted' where drawbar_type='UB'; update mmt_ods.test_instance_drawbar_info set drawbar_type_name='Ballasted' where drawbar_type='B'; insert into mmt_ods.test_instance_tyre_info ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, tyre_type, tyre_make, tyre_size, tyre_ply_rating, tyre_load_carrying_capacity, tyre_pressure_kg_per_cm2, tyre_number_of_lug, tyre_number_of_no_load_lug_30m, tyre_lug_height, tyre_dynamic_rolling_radius_mm, tyre_wheel_rim_make_and_size, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, dummy_f, tyre_make, size, ply_rating::int, load_carrying_capacity_in_kg, pressure_kg_cm2::numeric, number_of_lug::int, number_of_no_load_lug_30m::int, lug_height::numeric, dynamic_rolling_radius_mm::numeric, wheel_rim_make_size, file_format, sheet_mnemonic from mmt_staging2.DBOECD_test_engine_RPM_tyre_details_block ; insert into mmt_ods.drawbar_perf_results_summary ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, gear_number_and_range, travel_speed_km_per_hr, drawbar_power_kw, drawbar_power_hp, drawbar_pull_kgf, drawbar_pull_kn, engine_speed_min_1, fan_speed_min_1, wheel_slip_pct_front, no_of_load_lugs_front, wheel_slip_pct_rear, fuel_consumption_l_per_h, fuel_consumption_kg_per_kwh, fuel_consumption_g_per_kwh, fuel_consumption_kwh_per_l, temp_engine_oil_c, temp_trans_oil_c, temp_coolant_c, temp_fuel_in_c, temp_fuel_out_c, atm_conditions_rh_pct, atm_conditions_temp_c, atm_conditions_pressure_kpa, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, c1, c2::numeric, c3::numeric, c4::numeric, c5::int, c6::numeric, c7::int, c8::int, c9::numeric, c10::numeric, c11::numeric, c12::numeric, c13::numeric, c14::numeric, c15::numeric, c16::int, c17::int, c18::int, c19::int, c20::int, c21::numeric, c22::numeric, c23::numeric, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_drawbar_performance_selected_summary_block; insert into mmt_ods.drawbar_perf_oecd_results ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, srl_no, test_condition , gear_number_and_range, travel_speed_km_per_hr, drawbar_power_kw, drawbar_power_hp, drawbar_pull_kgf, drawbar_pull_kn, engine_speed_min_1, fan_speed_min_1, wheel_slip_pct_front, no_of_load_lugs_front, wheel_slip_pct_rear, fuel_consumption_l_per_h, fuel_consumption_kg_per_kwh, fuel_consumption_g_per_kwh, fuel_consumption_kwh_per_l, temp_engine_oil_c, temp_trans_oil_c, temp_coolant_c, temp_fuel_in_c, temp_fuel_out_c, atm_conditions_rh_pct, atm_conditions_temp_c, atm_conditions_pressure_kpa, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, c1_1, c2_1, c1, c2::numeric, c3::numeric, c4::numeric, c5::int, c6::numeric, c7::int, c8::int, c9::numeric, c10::numeric, c11::numeric, c12::numeric, c13::numeric, c14::numeric, c15::numeric, c16::int, c17::int, c18::int, c19::int, c20::int, c21::numeric, c22::numeric, c23::numeric, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_drawbar_performance_fuel_consumption_block; insert into mmt_ods.drawbar_perf_results ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, gear_number_and_range, travel_speed_km_per_hr, drawbar_power_kw, drawbar_power_hp, drawbar_pull_kgf, drawbar_pull_kn, engine_speed_min_1, fan_speed_min_1, wheel_slip_pct_front, no_of_load_lugs_front, wheel_slip_pct_rear, fuel_consumption_l_per_h, fuel_consumption_kg_per_kwh, fuel_consumption_g_per_kwh, fuel_consumption_kwh_per_l, temp_engine_oil_c, temp_trans_oil_c, temp_coolant_c, temp_fuel_in_c, temp_fuel_out_c, atm_conditions_rh_pct, atm_conditions_temp_c, atm_conditions_pressure_kpa, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, c1, c2::numeric, c3::numeric, c4::numeric, c5::int, c6::numeric, c7::int, c8::int, c9::numeric, c10::numeric, c11::numeric, c12::numeric, c13::numeric, c14::numeric, c15::numeric, c16::int, c17::int, c18::int, c19::int, c20::int, c21::numeric, c22::numeric, c23::numeric, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_drawbar_performance_gear_performance_block; insert into mmt_ods.test_instance_equipment_info (client_id, function_id, test_file_ref_no, tractor_make, tractor_model, srl_no, instrument_name, instrument_serial_no, calibration_due_date, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, s_no::int, instruments, instruments_no, date '1899-12-30' + cali_due_date::int * interval '1' day as cali_due_date, file_format, sheet_mnemonic from mmt_staging2.DBOECD_test_test_equipment_used_block; insert into mmt_ods.test_instance_measurement_uncertainty ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, load_cell, rpm_meter, speed, fuel_flow_meter, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, load_cell, rpm_meter, speed, fuel_flow_meter, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_measurement_uncertainty_block; insert into mmt_ods.test_instance_tractor_info_misc ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, capacity_of_fuel_tank_ltr, make_type_and_model_of_injection_pump, manufacturers_production_setting, make_type_and_model_of_injectors, make_type_and_model_of_magneto_coil_and_distributor, make_type_and_model_of_carburetor, ignition_or_injection_timing, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, regexp_replace(capacity_of_fuel_tank_lit,'[^0-9]', '', 'g')::int, make_type_and_model_of_injection_pump, manufacturer_production_setting, make_type_and_model_of_injectors, make_type_and_model_of_magneto_coil_and_distributor, make_type_and_model_of_carburetor, ignition_or_injection_timing_manual_or_automatic, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_tractor_specifications_fuel_and_injection_block; update mmt_ods.test_instance_tractor_info_misc a set aircleaner_make_model=b.make_and_model from mmt_staging2.dboecd_test_tractor_specifications_cleaner_block b where b.cleaner_type='Air cleaner' and a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_tractor_info_misc a set aircleaner_type=b.type from mmt_staging2.dboecd_test_tractor_specifications_cleaner_block b where cleaner_type='Air cleaner' and a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_tractor_info_misc a set precleaner_make_model=b.make_and_model from mmt_staging2.dboecd_test_tractor_specifications_cleaner_block b where cleaner_type='Precleaner (if fitted)' and a.test_file_ref_no=b.file_syspk; update mmt_ods.test_instance_tractor_info_misc a set precleaner_type=b.type from mmt_staging2.dboecd_test_tractor_specifications_cleaner_block b where cleaner_type='Precleaner (if fitted)' and a.test_file_ref_no=b.file_syspk; update mmt_staging2.dboecd_test_transmission_speed_chart_block a set tyre_condition=b.descr from mmt_staging2.dboecd_test_transmission_speed_chart_desc_block b where a.file_syspk=b.file_syspk; insert into mmt_ods.test_instance_gear_speed_chart ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, forward_reverse, gear, speed_kmph, tyre_condition, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, 'forward', gear, cast(coalesce(nullif(forward,''),'0') as numeric), tyre_condition, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_transmission_speed_chart_block; insert into mmt_ods.test_instance_gear_speed_chart ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, forward_reverse, gear, speed_kmph, tyre_condition, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, 'reverse', gear, cast(coalesce(nullif(reverse,''),'0') as numeric), tyre_condition, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_transmission_speed_chart_block; insert into mmt_ods.Test_instance_wheels_info (client_id, function_id, test_file_ref_no, tractor_make, tractor_model, steered_driving_wheel, location_of_driving_wheel, make_of_tyres, wheel_types, wheel_size, maximum_permissible_load_kg, ply_rating, track_width_max_mm, track_width_min_mm, inflation_pressure_kg_per_cm2, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, dummy_f, location_of_driving_wheel, make_of_tyres, types, size, maximum_permissible_load_kg::int, ply_rating::int, track_width_max_mm::int, track_width_min_mm::int, inflation_pressure_kg_cm2::numeric, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_transmission_wheels_block; insert into mmt_ods.Test_instance_fuel_lubricant_info ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, trade_name, fuel_lubricant_type, octane_per_cetane_number, viscocity, density_at_15c, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, trade_name, type, octane_cetane_number::numeric, viscosity, density_at_15c, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_transmission_fuel_lubricant_block ; insert into mmt_ods.drawbar_perf_observations ( client_id, function_id, test_file_ref_no, tractor_make, tractor_model, test_parameter , acceptance_criteria , observation , remarks, test_file_format, test_file_sheet_format ) select client_id, function_id, file_syspk, make, model, parameter, acceptance_criteria , observations, remarks, file_format, sheet_mnemonic from mmt_staging2.dboecd_test_remarks_block; update mmt_ods.test_instance a set report_prepared_by=b.prepared_by, report_reviewed_by=b.reviewed_by, report_approved_by=b.approved_by, report_template_replaces=b.replaces, report_template_rev_no=b.revision_no, report_template_rev_Date=b.rev3, report_template_no=b.rev1, report_title=b.comments from mmt_staging2.dboecd_test_remarks_footer_block b where a.test_file_ref_no=b.file_syspk; end $$ LANGUAGE plpgsql;